Magnetic Flow Meters For Water

Magnetic Flow Meters For Water

Magnetic Flow Meters For Water

1. Pipe diameter: DN6-DN2800
2. Type: split type, integrated type, plug-in type (suitable for pipe diameters above DN100)
3. Lining material: Neoprene, PTFE, PFA, FEP, F46
4. Electrode material: SS316L, HC, HB, Ti, Tan, Pt
 

1. Classification by type and connection method:

Type: remote, integrated, plug-in

Connection method: flange connection, clamp connection, threaded connection.

As shown below:

Integrated electromagnetic flowmeterRemote electromagnetic flowmeterInsertion electromagnetic flowmeter
Clamp connection electromagnetic flowmeterThreaded electromagnetic flowmeterFlange electromagnetic flowmeter

2. Features and applications:

magnetic flow meters for water is an instrument that measures the flow of conductive liquids based on the principle of Faraday’s law of electromagnetic induction. When the conductive liquid flows in the pipe, it cuts the magnetic field lines in the vertical direction, and an induced electric potential is generated on the electrodes on both sides of the pipe. The magnitude of the induced potential is proportional to the average flow rate of the conductive medium inside the pipe. The magnitude of the induced potential is transmitted to the converter, and the converter calculates the clockwise flow rate and the cumulative flow rate.

⑴. There are no resisting parts in the pipeline, the pressure loss is very small, the measurable flow range is large, the ratio of the maximum flow rate to the minimum flow rate is generally more than 20:1, and the applicable industrial pipe diameter range is wide, up to 3m.

⑵. The output signal is linear with the measured flow rate and has high accuracy. It can measure the flow rate of all conductive liquids such as acids, alkalis, salt solutions, water, sewage, corrosive liquids, mud, mineral pulp, paper pulp, etc. with conductivity ≥5μs/cm. .

3.Technical Parameters:

Product name

Beverage flow meter

Max flow rate

15m/s

Accuracy level

±0.5% ,±0.2%

Liquid conductivity

>5μS/cm

Nominal pressure

1.6Mpa (If need customize ,pls consult us )

Caliber

DN6-DN3000

Liner material

PTFE,PFA,F46Hard rubber ,Neoprene ,Polyurethane,

Electrode

SUS316, Hastelloy C(HC),Hastelloy B(HB)
Titanium(Ti), Tantalum(Ta), Platinum-iridium

Ambient humidity

5-100%RH(Relative humidity)

Ambient temperature

-25℃ to +60℃

Measuring range

1500:1, ≤15m/s

Structure type

Compact type ,Split type ,pluge-in type

Protection level

IP68,IP67,IP65( default)

Ex-proof Mark

ExmdIIBT4

Power supply

24VDC ,220VAC ,3.6V lithium battery

Signal output

4-20Ma output , pulse output

Communication protocol

Modbus RS485,Hart protocol

4.Selection of electrodes material

Electrode material

Corrosion resistance

SUS316

For industrial water, domestic water, sewage, corrosive media, widely used in petroleum, chemical, urea, and other industries.

Stainless steel coated tungsten carbide

For non-corrosive, highly abrasive media

Tantalum (Tan)

Has excellent corrosion resistance, and the glass is very similar, in addition to hydrofluoric acid, fuming nitric acid, alkali, almost all chemical media (including hydrochloric acid, sulfuric acid and aqua regia) corrosion.

Titanium(Ti)

It is resistant to seawater, various chlorides and hypochlorites, oxidative acids (including fuming nitric acid), organic acids, alkalis, etc, and is not resistant to the corrosion of pure reducing acids (such as sulfuric acid and hydrochloric acid). However, if the acid contains oxidants (such as nitric acid, Fe +++, Cu ++), the corrosion is greatly reduced.

Hastelloy C(HC)

Oxidative acid, such as nitric acid, mixed acid or chromic acid and sulfuric acid mixed medium corrosion, but also resistant to oxidizing salts such as Fe +++, Cu ++ or other oxidants such as hypochlorite solution above sea level, sea water corrosion

Platinum – iridium alloy

Almost applies to all chemicals, but not aqua regia and ammonium salts.

Hastelloy B(HB)

Hydrochloric acid of all concentrations below the boiling point has good corrosion resistance, but also sulfuric acid, phosphoric acid, hydrofluoric acid, organic acids and other non-oxidizing acid, alkali, non-oxidizing salt solution corrosion.

 

5.Flow Range

Flow rate—-flow comparison table

202104261347597a2a08d637f54843be90f4c7fb6a4981

0.01

1

2

3

4

5

15

15

0.0064

0.6362

1.2723

1.9085

2.5447

3.1809

9.5426

20

0.0113

1.1310

2.2619

3.3929

4.5239

5.6549

16.9646

25

0.0177

1.7671

3.5343

5.3014

7.0686

8.8357

26.5072

40

0.0452

4.5239

9.0478

13.5717

18.0956

22.6195

67.8584

50

0.0707

7.0686

14.1372

21.2058

28.2743

35.3429

106.0288

65

0.1195

11.9459

23.8919

35.8377

47.7836

59.7295

179.1886

80

0.1810

18.0956

36.1911

54.2867

72.3823

90.4779

271.4336

100

0.2827

28.2743

56.5487

84.8230

113.0973

141.3717

424.1150

150

0.6362

63.6173

127.2345

190.8518

254.4690

318.0863

954.2588

200

1.1310

113.0973

226.1947

339.2920

452.3893

565.4846

1696.4600

300

2.5447

254.4690

508.9380

763.4070

1017.8760

1272.3450

3817.0351

350

3.4636

346.3606

692.7212

1039.0818

1385.4424

1731.8030

5195.4089

400

4.5239

452.3893

904.7787

1357.1680

1809.5574

2261.9467

6785.8401

450

5.7256

572.5553

1145.1105

1717.6658

2290.2210

2862.7763

8588.3289

500

7.0686

706.8583

1413.7167

2120.5750

2827.4334

3534.2917

10602.8752

600

10.1788

1017.8760

2035.7520

3053.6281

4071.5041

5089.3801

15268.1403

700

13.8544

1385.4424

2770.8847

4156.3271

5541.7694

6927.2118

20781.6354

800

18.0956

1809.5574

3619.1147

5428.6721

7238.2295

9047.7868

27143.3605

900

22.9022

2290.2210

4580.4421

6870.6631

9160.8842

11451.1050

34353.3157

1000

28.2743

2827.4334

5654.8668

8482.3002

11309.7336

14137.1669

42411.5008

1200

40.7150

4071.5041

8143.0082

12214.5122

16286.0163

20357.5204

61072.5612

1400

55.4177

5541.7694

11083.5389

16625.3083

22167.0778

27708.8472

83126.5416

1600

72.3823

7238.2295

14476.4589

21714.6884

28952.9179

36191.1474

108573.4421

1800

91.6088

9160.8842

18321.7684

27482.6525

36643.5367

45804.4209

137413.2627

2000

113.0973

11309.7336

22619.4671

33929.2007

45238.9342

56548.6678

169646.0033

6.Part welding:

The welding of the magnetic flow meters for water part is also a critical part. We use argon arc welding for seamless welding to ensure the protection level and service life of the flow sensor.

 

Electromagnetic flowmeter sensor weldingFlowmeter sensor welding
Electromagnetic flowmeter weldingc38dcd1564a099c3524823ad26ea528

7.FAQ
Q: Are you manufacturer ?

A: Yes , we are manufacturer , we can offer you best quality flow meter and competitive price .Can meet your customized needs.

Q: Do you have any certificate? Can you provide certificate base on my request?

A: We have ISO and CE certificate. If you need other certificates, we can apply.

Q: What is the warranty for your product?

A:Two years warranty time .


8. Correct installation method:

Electromagnetic Water Flow Meter

9.About us :

Henan Junyuan company has advanced production technology and perfect after-sales service system. The main products are: electromagnetic water flowmeter, vortex air flow meter, turbine oil flow meter, ultrasonic water flow meter, throttling device, rota meter, complete set of automatic flow meter, It widely used in  electric power, metallurgy, water supply and drainage, petroleum,paper-making , chemical,  medicine, light industry, environmental protection and other departments.

Our philosophy: the pursuit of excellence, professionalism.

Our aim: To survive by our quality, to win the word of mouth by our service.

 

Flow meter factory picturemagnetic flowmeter sensor
stainless steel magnetic flowmeter sensorPTFE magnetic flowmeter sensor

 

Register an Interest


Provide Your Information



ICTC ICTC