Introduction of LDE electromagnetic flowmeter:

1.The LDE electromagnetic flowmeter consists of an electromagnetic flowmeter converter and an electromagnetic flowmeter sensor. There are integrated type, split type, plug-in type. It is used to measure the instantaneous flow and volume flow of various conductive liquids or mixtures of liquids and solids in closed pipes. Electromagnetic flowmeters are widely used in chemical, metallurgy, steel, coal, water conservancy, water supply and drainage, cement, printing and dyeing and chemical fiber and other industrial sectors.

2.The LDE electromagnetic flowmeter is specially designed with a Chinese and English liquid crystal display with a wide-screen backlight, which is fully functional, intuitive, and easy to operate. The integrated electromagnetic flowmeter can meet the field display, and can also output Modbus, 4 ~ 20mA current output, For pulse output, regulation and control, it has been widely used in chemical industry, environmental protection, metallurgy, medicine, papermaking, water supply and drainage and other industrial technology and management departments.

Working principle of LDE electromagnetic flowmeter:

1. The electromagnetic flowmeter is based on Faraday’s law of electromagnetic induction. In the electromagnetic flowmeter, the conductive medium in the measuring tube is equivalent to the conductive metal rod in the Faraday test, and the two electromagnetic coils at the upper and lower ends generate a constant magnetic field. When a conductive medium flows, an induced voltage is generated. Two electrodes inside the pipe measure the induced voltage generated. The measuring tube is electromagnetically isolated from the fluid and the measuring electrode by means of a non-conductive lining (rubber, PTFE, Teflon, etc.).

2. The measurement accuracy of LDE integrated electromagnetic flowmeter is not affected by changes in fluid density, viscosity, temperature, pressure and conductivity. The sensor induced voltage signal has a linear relationship with the average flow rate, so the measurement accuracy is high. There are no obstructions in the measuring pipe, so there is no additional pressure loss; there are no moving parts in the measuring pipe, so the sensor life is extremely long. Since the induced voltage signal is formed in the entire space filled with magnetic field and is an average value on the pipe surface, the straight pipe section required by the sensor is short, and the length is 5 times the pipe diameter. In the sensor part, only the lining and electrodes are in contact with the liquid to be measured. As long as the materials of the electrodes and linings are reasonably selected, they can be resistant to corrosion and wear. The converter adopts the latest and most advanced single chip microcomputer (MCU) and surface mount technology (SMT) in the world, with reliable performance, high precision, low power consumption, stable zero point and convenient parameter setting. Click to display LCD in Chinese and English, display cumulative flow, instantaneous flow, flow rate, flow percentage, etc. Bidirectional measurement system, which can measure forward flow and reverse flow. The use of special production technology and high-quality materials ensures that the performance of the product remains stable for a long time.

3. LDE split electromagnetic flowmeter is an inductive instrument that measures the volume flow of conductive medium in the tube according to Faraday’s law of electromagnetic induction. The first domestic initiative, the technology has reached the domestic leading level. The split-type electromagnetic flowmeter can output 4-20mA current signal for recording, adjustment and control while satisfying on-site display. It has been widely used in chemical industry, environmental protection, metallurgy, medicine, papermaking, water supply and drainage and other industrial technologies and management department. In addition to measuring the flow of general conductive liquids, the split-type electromagnetic flowmeter can also measure liquid-solid two-phase flow, high-viscosity liquid flow, and volume flow of salts, strong acids, and strong alkali liquids. The instrument has a simple and reliable structure, has no moving parts, and has a long working life. There are no shut-off and blocking parts, and there is no pressure loss and fluid blockage. The measurement accuracy is not affected by the type of the measured medium and its temperature, viscosity, density, pressure and other physical parameters. Different combinations of PTFE or rubber lining and electrode materials such as Hc, Hb, 316L, Ti can meet the needs of different media.

LDE electromagnetic flowmeter site：

LDE electromagnetic flowmeter Lining material selection table：

LDE electromagnetic flowmeter Electrode material selection table：

FAQ:

1. Q: Is the electromagnetic flowmeter easy to install?

 A: Yes, this installation is easy, we also provide installation manual for LED electromagnetic flowmeter type, if you need? Please feel free to contact us.

2. Q: How to choose the diameter of the electromagnetic flowmeter?

A: Based on your pipeline ID and flow range. We have professional business managers to choose the best LDE electromagnetic flowmeter for you.

3. Q: Can I take samples?

A: Yes, we have materials in stock to help you get samples as soon as possible.

4. Q: How will the order be shipped?

A: Can be shipped by express, air or sea. We have cooperative professional freight forwarders who will calculate all the costs for you and let you know that if you have your own freight forwarder, we can ship to your designated warehouse in China for free.

5. Q: Can I visit your factory?

A: Of course, we welcome you to visit our factory anytime. If you need, we will welcome you to visit our factory.

6.Q: If I have already paid, when will you help me produce?

A: When we receive your payment, we will give you the receipt and arrange production immediately.